ECU Tuning
Combine Stage 1 or Stage 2 with solutions like EGR, DPF or AdBlue off. Any number of options – one fixed price per file.
Upload your original ECU file and get professional OLS tuning files from our WinOLS database – Stage 1, Stage 2, EGR, DPF, AdBlue and more. Fully automated, around the clock.
Stage 1 power, torque and dyno chart for 13.493 engines.
You only pay when a matching solution has been found.
Combine Stage 1 or Stage 2 with solutions like EGR, DPF or AdBlue off. Any number of options – one fixed price per file.
Get every available version for your ECU from our database and pick the one you need.
Upload your modified file and get it back with corrected checksum and CVN – using original WinOLS checksum modules.
OLS Tuningfiles is the 24/7 file service for professional tuners and workshops. You upload the original read of your ECU, our system searches our WinOLS database and you receive a ready-made tuning file in about 60 seconds – no waiting for office hours.
Our OLS tuning files are based on more than 440,000 completed projects since 2008. Whether you need a Stage 1 or Stage 2 chiptuning file, EGR, DPF, AdBlue or GPF/OPF solutions, pops & bangs or start/stop off – every file comes from proven WinOLS projects.
With the patches service you get every available WinOLS version for your ECU and choose exactly the tuning file you need. Fixed price per file, secure card payment and a proper invoice for every order.
Combine as many solutions as you need – the price per file stays the same.
More power and torque with optimised maps from proven WinOLS projects – for diesel and petrol engines.
Exhaust gas recirculation solution in the tuning file, for example for vehicles used off-road or in motorsport.
Diesel particulate filter solution as part of your OLS tuning file, including related error codes.
AdBlue and SCR solution in the ECU file – combinable with Stage 1 and other options.
Petrol particulate filter solution for modern petrol engines.
Pops & bangs, start/stop off, swirl flaps, E85 flexfuel, VAG oil pressure fix and many more WinOLS solutions.
Upload your original .bin file (max. 50 MB).
Our system searches for a matching solution – usually within 60 seconds.
Solution found? Pay securely by card. No result, no charge.
Download your file immediately. The invoice is sent by email.
Changed a file yourself? Upload it and get it back with corrected checksum and CVN – processed automatically with original WinOLS checksum modules.
Every ECU checks its software with checksums. If maps are changed and the checksum is not corrected, the ECU detects the modification – the engine may not start or the ECU goes into limp mode. Before writing a modified file, the checksum must always be correct.
The CVN (Calibration Verification Number) is a value calculated from the calibration data that can be read out via OBD – e.g. during emissions tests or by diagnostic tools. After a modification the CVN changes. With CVN adjustment the file reports the CVN of the original again, where the checksum module supports it.
Checksum only or checksum + CVN – you only pay for what you need.
Upload your modified file and, ideally, the unmodified original as well.
WinOLS corrects the file automatically within seconds. Pay securely and download immediately – no result, no costs.
Some ECUs (e.g. Bosch MED17 with RSA, MG1/MD1) can only be corrected reliably with the real, unmodified original file.
Our WinOLS database covers the most common engine control units.
Whether a solution is available for your specific file is checked automatically after upload – you only pay if a matching file is found.
Fully automated processing, available 24/7.
Card payment via Bank of Georgia. We never see your card details.
Every order comes with a PDF invoice by email.
Since 2008, powered by ALPHA LLC – registered EVC reseller.
ECU tuning costs €30.00 per file – no matter how many options you select.
OLS tuning files are modified ECU files created with WinOLS. You upload your original read, our system finds the matching solution in our WinOLS database and you download the modified .bin file.
Yes. With our CVN / Checksum service you upload your modified file (ideally together with the original), choose checksum or checksum + CVN and get the corrected file back within seconds. If no matching checksum module is found, you pay nothing.
You receive a standard .bin file that you write back to the ECU with your own tuning tool, for example KESS3, Autotuner, Flex or KTAG.
No. You only pay once a matching file has been found.
No. At checkout you simply confirm your email address with a code. Returning customers are recognised automatically.
With ECU tuning you choose your solutions (e.g. Stage 1 + EGR) and receive one finished tuning file. With patches you get all available WinOLS versions for your ECU and pick the one you need.
Please upload the original read as a .bin file, max. 50 MB.
The PDF invoice is emailed to you after payment and is always available in your account.
Upload it on our main portal and we will take care of your file there.